Putting Soft Top Back On Bronco: A Step-By-Step Guide

2021 Bronco Fastback Soft Top With Top Down First Real World Photos from fordauthority.com

If you own a Ford Bronco with a soft top, you know how frustrating it can be to take it off and put it back on. But don't worry, we've got you covered. In this article, we will guide you through the process of putting the soft top back on your Bronco.

Step 1: Clean the Soft Top

Before putting the soft top back on, you need to make sure it's clean. Start by removing any debris, dirt, or dust from the top. You can use a soft-bristled brush or a vacuum cleaner to do this. Once you've cleaned the top, use a mild detergent and warm water to wash it. Rinse it thoroughly and let it dry completely.

Tip: Avoid using harsh chemicals or abrasive cleaners that can damage the soft top.

Step 2: Install the Side Rails

The side rails are an essential part of putting the soft top back on your Bronco. Start by attaching the rails to the frame of the car. Make sure they are securely in place before moving on to the next step.

Tip: Use a socket wrench to tighten the bolts on the side rails.

Step 3: Install the Rear Bow

The rear bow is the next component you need to install. This part of the soft top goes over the back of the car and provides support for the top. Start by inserting the rear bow into the brackets on the side rails. Once you've done this, use the adjustment knobs to position the bow correctly.

Tip: Don't force the rear bow into place. If it doesn't fit, you may need to adjust the side rails.

Step 4: Install the Top

Now it's time to install the soft top itself. Start by attaching the front of the top to the windshield frame. Make sure the top is centered and aligned. Once you've done this, attach the top to the rear bow by inserting the tabs into the slots.

Tip: Make sure the top is taut and smooth before attaching the rear bow.

Step 5: Install the Windows

The final step is to install the windows. This can be a bit tricky, but with some patience, you can get it done. Start by inserting the window into the door frame. Then, attach the window to the top by inserting the tabs into the slots. Repeat this process for the other side.

Tip: Don't force the windows into place. If they don't fit, adjust the top or the door frame.

Now that you've followed these steps, your soft top should be back on your Bronco. Take a step back and admire your work. You've just accomplished a task that many Bronco owners find challenging. In conclusion, putting the soft top back on your Bronco can be a daunting task, but with some patience and careful attention to detail, you can get it done. Follow these steps, and you'll have your top back on in no time. Remember to take your time and don't force any parts into place. If you're struggling with any step, don't hesitate to consult your Bronco owner's manual or seek help from a professional.