Have you ever found yourself in a situation where your car battery dies, and you need to jump-start it using jumper cables? If yes, then you must be aware of the importance of correctly connecting the cables to avoid any mishaps or damages to your vehicle. One of the most common questions people have when using jumper cables is, what color is negative on jumper cables? In this article, we will discuss everything you need to know about jumper cables and their proper usage.
Understanding Jumper Cables
Jumper cables are an essential tool for every driver to have in their car’s trunk. It is a pair of insulated wires with clips on both ends that are used to jump-start a car’s battery from another vehicle. The clips are usually color-coded- one red and one black- to identify the positive and negative ends of the cables.
What Do the Colors on Jumper Cables Mean?
The red clip on jumper cables represents the positive end, while the black clip represents the negative end. The color-coding is an industry standard that all manufacturers follow. The positive end is usually connected to the battery’s positive terminal while the negative end is connected to the negative terminal. However, it is essential to note that you should not rely solely on color-coding when connecting the cables.
How to Connect Jumper Cables Correctly
Connecting jumper cables correctly is crucial to avoid any damage to your vehicle or yourself. Here are the steps to follow:
Step 1: Position the Vehicles Correctly
Park the vehicle with the good battery next to the one with the dead battery, ensuring that the cars are not touching each other. Turn off the ignition of both cars and set the parking brakes.
Step 2: Identify the Positive and Negative Terminals
Identify the positive and negative terminals of both car batteries. The positive terminal is usually marked with a “+” sign, while the negative terminal is marked with a “-” sign. Make sure the terminals are clean and not corroded.
Step 3: Connect the Jumper Cables
Connect the red clip of the jumper cable to the positive terminal of the dead battery. Then, connect the other red clip to the positive terminal of the good battery. Next, connect the black clip of the jumper cable to the negative terminal of the good battery. Finally, connect the other black clip to an unpainted metal surface on the car with the dead battery, such as a bolt or a bracket.
Step 4: Start the Car
Start the car with the good battery and let it run for a few minutes. Then, try to start the car with the dead battery. If it starts, let both cars run for a few minutes before disconnecting the cables.
Conclusion
Now you know that the color of the negative end on jumper cables is black. Remember to follow the correct steps when using jumper cables to avoid any accidents. Always check the manufacturer’s instructions and your car’s manual before jump-starting your car. Stay safe on the road!
Komentar
Posting Komentar